Previous Article: Updating Asset and Gateway Details
Now that you have figured out which tag belongs to each asset, it is time to attach them!
There are four standard methods of attaching our tracking tags to an Asset.
- Cable Ties
- Rivet / Screw
- Stick - 3M tape
Simply pick your preferred attachment method above and attach each tag to its corresponding asset, if you're attaching the tag to a flat surface, make sure to keep the side with the LED and power button facing away from the surface.
Tags are delivered turned off. Hold the black power button for 3 seconds to turn on. The tag will play a quick sequence of beeps and flash a red LED three times.
You can press the button to make sure that the tag is turned on - Tag will flash a red / blue LED after a short press if turned on. When turned off there is a smaller green flash.
- The rubber pieces filling the key ring holes on our Vector Tags can be removed by using a tool to lever them out.
- Tag orientation can be important for signal propagation
- Remember that the Tags have a replaceable battery, so make sure the battery can be accessed
Next Article: Creating Users